Full-height turnstile LBAT 10

Characteristics

Options

full-height

Description

Structure: Galvanised sheet steel, RAL 9010 polyester paint.
Rotor: Ø 40mm galvanised steel arms on bearings on their lower section.
Casing: Detachable front allowing for the installation of access control readers, intercoms…
Roof: Aluminium rain gutters.
Paint: Structure in galvanised steel with RAL 9010 paint. Rotor in steel with RAL 9010 paint. Casing in galvanised steel with RAL 9010 paint. Roof in laminated aluminium with RAL 9010 paint.
Drive system: Controls integrated into the upper casing. Manual drive device, two-way locking through the use of electromagnetic ratchets. Single-phase 230V-50Hz power supply. Logic control through a programmable 24V PLC. Two-way unlocking signal: dry contact (no power). In the event of a power failure, the rotor will move freely in both directions of travel. On request: two-way locking or one-way locking with free passage in the other direction (to be specified in the order).
Details: Efficient, single-person access control, no monitoring personnel required. 15-20 passages per minute, depending on access controls. Robust construction resistant to bad weather thanks to its galvanised steel structure. Simplified control and drive system inside the upper casing. PLC management with IP communication (optional). Reader support for the installation of access controls (badge readers, intercom, …). Red/green light on each side. Resistance heating.